hopr_network_types::udp

Struct ConnectedUdpStream

Source 
pub struct ConnectedUdpStream { /* private fields */ }
Expand description

Mimics TCP-like stream functionality on a UDP socket by restricting it to a single counterparty and implements [tokio::io::AsyncRead] and [tokio::io::AsyncWrite]. The instance is always constructed using a UdpStreamBuilder.

To set a counterparty, one of the following must happen:

  1. setting it during build via UdpStreamBuilder::with_counterparty
  2. receiving some data from the other side.

Whatever of the above happens first, sets the counterparty. Once the counterparty is set, all data sent and received will be sent or filtered by this counterparty address.

If data from another party is received, an error is raised, unless the object has been constructed with ForeignDataMode::Discard or ForeignDataMode::Accept setting.

This object is also capable of parallel processing on a UDP socket. If parallelism is set, the instance will create multiple sockets with SO_REUSEADDR and spin parallel tasks that will coordinate data and transmission retrieval using these sockets. This is driven by RX/TX MPMC queues, which are per-default unbounded (see queue size for details).

Implementations§

Source§

impl ConnectedUdpStream

Source

pub fn bound_address(&self) -> &SocketAddr

Local address that all UDP sockets in this instance are bound to.

Source

pub fn builder() -> UdpStreamBuilder

Creates a new builder.

Trait Implementations§

Source§

impl AsyncRead for ConnectedUdpStream

Source§

fn poll_read( self: Pin<&mut Self>, cx: &mut Context<'_>, buf: &mut ReadBuf<'_>, ) -> Poll<Result<()>>

Attempts to read from the AsyncRead into buf. Read more
Source§

impl AsyncWrite for ConnectedUdpStream

Source§

fn poll_write( self: Pin<&mut Self>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize>>

Attempt to write bytes from buf into the object. Read more
Source§

fn poll_flush(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<()>>

Attempts to flush the object, ensuring that any buffered data reach their destination. Read more
Source§

fn poll_shutdown(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<()>>

Initiates or attempts to shut down this writer, returning success when the I/O connection has completely shut down. Read more
§

fn poll_write_vectored( self: Pin<&mut Self>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>

Like poll_write, except that it writes from a slice of buffers. Read more
§

fn is_write_vectored(&self) -> bool

Determines if this writer has an efficient poll_write_vectored implementation. Read more
Source§

impl Drop for ConnectedUdpStream

Source§

fn drop(&mut self)

Executes the destructor for this type. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<R> AsyncReadExt for R
where R: AsyncRead + ?Sized,

§

fn chain<R>(self, next: R) -> Chain<Self, R>
where Self: Sized, R: AsyncRead,

Creates a new AsyncRead instance that chains this stream with next. Read more
§

fn read<'a>(&'a mut self, buf: &'a mut [u8]) -> Read<'a, Self>
where Self: Unpin,

Pulls some bytes from this source into the specified buffer, returning how many bytes were read. Read more
§

fn read_buf<'a, B>(&'a mut self, buf: &'a mut B) -> ReadBuf<'a, Self, B>
where Self: Unpin, B: BufMut + ?Sized,

Pulls some bytes from this source into the specified buffer, advancing the buffer’s internal cursor. Read more
§

fn read_exact<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadExact<'a, Self>
where Self: Unpin,

Reads the exact number of bytes required to fill buf. Read more
§

fn read_u8(&mut self) -> ReadU8<&mut Self>
where Self: Unpin,

Reads an unsigned 8 bit integer from the underlying reader. Read more
§

fn read_i8(&mut self) -> ReadI8<&mut Self>
where Self: Unpin,

Reads a signed 8 bit integer from the underlying reader. Read more
§

fn read_u16(&mut self) -> ReadU16<&mut Self>
where Self: Unpin,

Reads an unsigned 16-bit integer in big-endian order from the underlying reader. Read more
§

fn read_i16(&mut self) -> ReadI16<&mut Self>
where Self: Unpin,

Reads a signed 16-bit integer in big-endian order from the underlying reader. Read more
§

fn read_u32(&mut self) -> ReadU32<&mut Self>
where Self: Unpin,

Reads an unsigned 32-bit integer in big-endian order from the underlying reader. Read more
§

fn read_i32(&mut self) -> ReadI32<&mut Self>
where Self: Unpin,

Reads a signed 32-bit integer in big-endian order from the underlying reader. Read more
§

fn read_u64(&mut self) -> ReadU64<&mut Self>
where Self: Unpin,

Reads an unsigned 64-bit integer in big-endian order from the underlying reader. Read more
§

fn read_i64(&mut self) -> ReadI64<&mut Self>
where Self: Unpin,

Reads an signed 64-bit integer in big-endian order from the underlying reader. Read more
§

fn read_u128(&mut self) -> ReadU128<&mut Self>
where Self: Unpin,

Reads an unsigned 128-bit integer in big-endian order from the underlying reader. Read more
§

fn read_i128(&mut self) -> ReadI128<&mut Self>
where Self: Unpin,

Reads an signed 128-bit integer in big-endian order from the underlying reader. Read more
§

fn read_f32(&mut self) -> ReadF32<&mut Self>
where Self: Unpin,

Reads an 32-bit floating point type in big-endian order from the underlying reader. Read more
§

fn read_f64(&mut self) -> ReadF64<&mut Self>
where Self: Unpin,

Reads an 64-bit floating point type in big-endian order from the underlying reader. Read more
§

fn read_u16_le(&mut self) -> ReadU16Le<&mut Self>
where Self: Unpin,

Reads an unsigned 16-bit integer in little-endian order from the underlying reader. Read more
§

fn read_i16_le(&mut self) -> ReadI16Le<&mut Self>
where Self: Unpin,

Reads a signed 16-bit integer in little-endian order from the underlying reader. Read more
§

fn read_u32_le(&mut self) -> ReadU32Le<&mut Self>
where Self: Unpin,

Reads an unsigned 32-bit integer in little-endian order from the underlying reader. Read more
§

fn read_i32_le(&mut self) -> ReadI32Le<&mut Self>
where Self: Unpin,

Reads a signed 32-bit integer in little-endian order from the underlying reader. Read more
§

fn read_u64_le(&mut self) -> ReadU64Le<&mut Self>
where Self: Unpin,

Reads an unsigned 64-bit integer in little-endian order from the underlying reader. Read more
§

fn read_i64_le(&mut self) -> ReadI64Le<&mut Self>
where Self: Unpin,

Reads an signed 64-bit integer in little-endian order from the underlying reader. Read more
§

fn read_u128_le(&mut self) -> ReadU128Le<&mut Self>
where Self: Unpin,

Reads an unsigned 128-bit integer in little-endian order from the underlying reader. Read more
§

fn read_i128_le(&mut self) -> ReadI128Le<&mut Self>
where Self: Unpin,

Reads an signed 128-bit integer in little-endian order from the underlying reader. Read more
§

fn read_f32_le(&mut self) -> ReadF32Le<&mut Self>
where Self: Unpin,

Reads an 32-bit floating point type in little-endian order from the underlying reader. Read more
§

fn read_f64_le(&mut self) -> ReadF64Le<&mut Self>
where Self: Unpin,

Reads an 64-bit floating point type in little-endian order from the underlying reader. Read more
§

fn read_to_end<'a>(&'a mut self, buf: &'a mut Vec<u8>) -> ReadToEnd<'a, Self>
where Self: Unpin,

Reads all bytes until EOF in this source, placing them into buf. Read more
§

fn read_to_string<'a>( &'a mut self, dst: &'a mut String, ) -> ReadToString<'a, Self>
where Self: Unpin,

Reads all bytes until EOF in this source, appending them to buf. Read more
§

fn take(self, limit: u64) -> Take<Self>
where Self: Sized,

Creates an adaptor which reads at most limit bytes from it. Read more
§

impl<W> AsyncWriteExt for W
where W: AsyncWrite + ?Sized,

§

fn write<'a>(&'a mut self, src: &'a [u8]) -> Write<'a, Self>
where Self: Unpin,

Writes a buffer into this writer, returning how many bytes were written. Read more
§

fn write_vectored<'a, 'b>( &'a mut self, bufs: &'a [IoSlice<'b>], ) -> WriteVectored<'a, 'b, Self>
where Self: Unpin,

Like write, except that it writes from a slice of buffers. Read more
§

fn write_buf<'a, B>(&'a mut self, src: &'a mut B) -> WriteBuf<'a, Self, B>
where Self: Sized + Unpin, B: Buf,

Writes a buffer into this writer, advancing the buffer’s internal cursor. Read more
§

fn write_all_buf<'a, B>( &'a mut self, src: &'a mut B, ) -> WriteAllBuf<'a, Self, B>
where Self: Sized + Unpin, B: Buf,

Attempts to write an entire buffer into this writer. Read more
§

fn write_all<'a>(&'a mut self, src: &'a [u8]) -> WriteAll<'a, Self>
where Self: Unpin,

Attempts to write an entire buffer into this writer. Read more
§

fn write_u8(&mut self, n: u8) -> WriteU8<&mut Self>
where Self: Unpin,

Writes an unsigned 8-bit integer to the underlying writer. Read more
§

fn write_i8(&mut self, n: i8) -> WriteI8<&mut Self>
where Self: Unpin,

Writes a signed 8-bit integer to the underlying writer. Read more
§

fn write_u16(&mut self, n: u16) -> WriteU16<&mut Self>
where Self: Unpin,

Writes an unsigned 16-bit integer in big-endian order to the underlying writer. Read more
§

fn write_i16(&mut self, n: i16) -> WriteI16<&mut Self>
where Self: Unpin,

Writes a signed 16-bit integer in big-endian order to the underlying writer. Read more
§

fn write_u32(&mut self, n: u32) -> WriteU32<&mut Self>
where Self: Unpin,

Writes an unsigned 32-bit integer in big-endian order to the underlying writer. Read more
§

fn write_i32(&mut self, n: i32) -> WriteI32<&mut Self>
where Self: Unpin,

Writes a signed 32-bit integer in big-endian order to the underlying writer. Read more
§

fn write_u64(&mut self, n: u64) -> WriteU64<&mut Self>
where Self: Unpin,

Writes an unsigned 64-bit integer in big-endian order to the underlying writer. Read more
§

fn write_i64(&mut self, n: i64) -> WriteI64<&mut Self>
where Self: Unpin,

Writes an signed 64-bit integer in big-endian order to the underlying writer. Read more
§

fn write_u128(&mut self, n: u128) -> WriteU128<&mut Self>
where Self: Unpin,

Writes an unsigned 128-bit integer in big-endian order to the underlying writer. Read more
§

fn write_i128(&mut self, n: i128) -> WriteI128<&mut Self>
where Self: Unpin,

Writes an signed 128-bit integer in big-endian order to the underlying writer. Read more
§

fn write_f32(&mut self, n: f32) -> WriteF32<&mut Self>
where Self: Unpin,

Writes an 32-bit floating point type in big-endian order to the underlying writer. Read more
§

fn write_f64(&mut self, n: f64) -> WriteF64<&mut Self>
where Self: Unpin,

Writes an 64-bit floating point type in big-endian order to the underlying writer. Read more
§

fn write_u16_le(&mut self, n: u16) -> WriteU16Le<&mut Self>
where Self: Unpin,

Writes an unsigned 16-bit integer in little-endian order to the underlying writer. Read more
§

fn write_i16_le(&mut self, n: i16) -> WriteI16Le<&mut Self>
where Self: Unpin,

Writes a signed 16-bit integer in little-endian order to the underlying writer. Read more
§

fn write_u32_le(&mut self, n: u32) -> WriteU32Le<&mut Self>
where Self: Unpin,

Writes an unsigned 32-bit integer in little-endian order to the underlying writer. Read more
§

fn write_i32_le(&mut self, n: i32) -> WriteI32Le<&mut Self>
where Self: Unpin,

Writes a signed 32-bit integer in little-endian order to the underlying writer. Read more
§

fn write_u64_le(&mut self, n: u64) -> WriteU64Le<&mut Self>
where Self: Unpin,

Writes an unsigned 64-bit integer in little-endian order to the underlying writer. Read more
§

fn write_i64_le(&mut self, n: i64) -> WriteI64Le<&mut Self>
where Self: Unpin,

Writes an signed 64-bit integer in little-endian order to the underlying writer. Read more
§

fn write_u128_le(&mut self, n: u128) -> WriteU128Le<&mut Self>
where Self: Unpin,

Writes an unsigned 128-bit integer in little-endian order to the underlying writer. Read more
§

fn write_i128_le(&mut self, n: i128) -> WriteI128Le<&mut Self>
where Self: Unpin,

Writes an signed 128-bit integer in little-endian order to the underlying writer. Read more
§

fn write_f32_le(&mut self, n: f32) -> WriteF32Le<&mut Self>
where Self: Unpin,

Writes an 32-bit floating point type in little-endian order to the underlying writer. Read more
§

fn write_f64_le(&mut self, n: f64) -> WriteF64Le<&mut Self>
where Self: Unpin,

Writes an 64-bit floating point type in little-endian order to the underlying writer. Read more
§

fn flush(&mut self) -> Flush<'_, Self>
where Self: Unpin,

Flushes this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
§

fn shutdown(&mut self) -> Shutdown<'_, Self>
where Self: Unpin,

Shuts down the output stream, ensuring that the value can be dropped cleanly. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
§

impl<T> TokioAsyncReadCompatExt for T
where T: AsyncRead,

§

fn compat(self) -> Compat<Self>
where Self: Sized,

Wraps self with a compatibility layer that implements futures_io::AsyncRead.
§

impl<T> TokioAsyncWriteCompatExt for T
where T: AsyncWrite,

§

fn compat_write(self) -> Compat<Self>
where Self: Sized,

Wraps self with a compatibility layer that implements futures_io::AsyncWrite.
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<T> ErasedDestructor for T
where T: 'static,

§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeSendSync for T